Crew Industrial Flooring have completed the complete refurbishment of major direct mail company printing floor. The original floor surface had become damaged and was holding the dirt. The client required a smooth easy to clean surface that would withstand printing inks and toner coming in contact with the surface, along with constant pump truck traffic, a 3mm Epoxy SL as this would provide all the characteristics required by the client.
The existing floor surface was made up of vinyl tile and sheet vinyl. After removal of the vinyl and the thick layer of adhesive the concrete surface proved to be in very poor condition. The floor surface was mechanically prepared by mechanical vinyl lifters, vonarxing and grinding, this removed all the adhesive along with provide a mechanical key for the two coats of epoxy primer. After the primer had cured 3mm of Epoxy SL was applied to provide a smooth easy to clean surface along with chemical resistant.

The project was completed below budget and on time. Work started on a Friday night in less than 48hrs enabling the client to continue with there printing process.

Back to News